1 cubic meter formaldehyde climate boxVOC release environmental test chamberLarge VOC release detection climate chamberAutomotive interior parts (bag method) environmental cabinVehicle environment cabinPlastic runway environment cabinWood-based panel pretreatment chamberWood-based panel gas analysis method formaldehyde testerNon-standard customization
The equipment can provide a standard temperature and humidity VOC clean environment, placing materials and products or their samples in the pretreatment chamber, adjusting the temperature, relative humidity, wind speed, pressure, indoor VOC clean conditions and other environmental conditions in the chamber to make the sample The temperature and humidity are consistent in the balance chamber, and the pressure inside and outside the test piece is balanced. At the same time, cross-contamination of the sample (cross-contamination of TVOC release, cross-contamination of single-component VOC) must be avoided.
one. Product Usage:
This product can provide a standard temperature and humidity VOC clean environment, put materials and products or their samples in the pretreatment room, adjust the temperature, relative humidity, wind speed, pressure, indoor VOC clean conditions and other environmental conditions in the chamber, so that the sample The temperature and humidity are consistent in the balance chamber, and the pressure inside and outside the test piece is balanced. At the same time, cross-contamination of the sample (cross-contamination of TVOC release, cross-contamination of single-component VOC) must be avoided.
Second, the implementation of standards
GB/T 10592 "Technical conditions for high and low temperature test chambers"
ISO_FDIS_12219-1:2011(E) "Climate Chamber Method for Detecting VOC Release Concentration in Vehicles"
GB/T5170.2-08 "Environmental test equipment basic parameters verification method temperature test equipment"
GB/T5170.5-08 "Environmental test equipment basic parameters verification method humidity test equipment"
Third, technical indicators
|
序号 |
项目名称 |
技术参数 |
|
1 |
舱内容积 |
18、24m3（尺寸可以根据客户要求定制） |
|
2 |
温度 |
温度范围：20～60℃ |
|
3 |
湿度 |
湿度范围：35%～70% 湿度波动度：±2%R.H. |
|
4 |
表面风速 |
0.1-0.5M/S 连续可调 |
|
5 |
舱门尺寸 |
W2000×H1900mm |
|
6 |
最大新风风量 |
320 m3/h |
|
7 |
本底浓度 |
环境空气VOC在6.0PPM及以下时，去除率为90%以上（洁净空气处理系统的出口空气质量）。经过新风处理装置后， TVOC浓度≤350μg/m3，甲醛≤15 μg/m3。其它挥发性有机物浓度不超过下列指标： 苯 ≤15 μg/m3 乙醛 ≤15 μg/m3 甲苯 ≤15 μg/m3 乙苯 ≤15 μg/m3 二甲苯 ≤15 μg/m3 甲醛≤15 μg/m3 丙酮 ≤15 μg/m3 苯乙烯≤2 μg/m3 |
Address: Changqing DistrictJinan City Phone: 0531-85993641 Fax: 0531-85556501 Email: jnhnt@163.com
WeChat Public: JN-HAINAT
WeChat: 13220556913